Solutions
The Mission-Critical Liquid Cooling Solution
for Peace of Mind
The NeuCool Platform
NeuCool Overview
NeuCool is a complete liquid cooling solution, using a highly-efficient two-phase process and a dielectric refrigerant that is entirely safe for electronics.
The NeuCool system supports 1500W+ per socket and up to 100kW per rack (80kW direct-to-chip cooling), easily cooling current and future generations of high-performance CPUs & GPUs.
NeuCool is a tailorable solution that is adaptable to specific compute needs and infrastructure systems.
The NeuCool Platform
NeuCool Overview
NeuCool is a complete liquid cooling solution, using a highly-efficient two-phase process and a dielectric refrigerant that is entirely safe for electronics.
The NeuCool system supports 1500W+ per socket and up to 100kW per rack (80kW direct-to-chip cooling), easily cooling current and future generations of high-performance CPUs & GPUs.
NeuCool is a tailorable solution that is adaptable to specific compute needs and infrastructure systems.
NeuCool 2P DTC In-Rack System
NeuCool is a complete system that accommodates standard server racks for ease of deployment from the edge to hyperscale data center, and everywhere in between.
- Supports extremely dense servers and racks, allowing move compute power per square foot
- Highly-efficient system drives PUE down, allowing more power to be allocated to compute
- Compatible with a wide variety of facility water and final heat rejection systems, including waterless, pumped-refrigerant options
NeuCool Components
Each component of the NeuCool 2P DTC In-Rack System is artfully designed to maximize system performance while optimizing ease of deployment, serviceability and value throughout an extended lifecycle
NeuCool iPCU
The Intelligent Platform Control Unit is the heart and brains of the NeuCool System.
- Contains core logic, industrial condenser, N+1 pumps, system sensors, and touchscreen control system
- Redundant, hot-swappable components, including power supplies, pumps, sensors, and core logic board
- Integrated condenser enables transfer of heat from NeuCool loop to a variety of heat rejection options
- Intelligent, load-balancing pump system extends lifecycle and provides robust fault tolerance to maximize uptime
NeuCool Components
Each component of the NeuCool 2P DTC In-Rack System is artfully designed to maximize system performance while optimizing ease of deployment, serviceability and value throughout an extended lifecycle
NeuCool iPCU
The Intelligent Platform Control Unit is the heart and brains of the NeuCool System.
- Contains core logic, industrial condenser, N+1 pumps, system sensors, and touchscreen control system
- Redundant, hot-swappable components, including power supplies, pumps, sensors, and core logic board
- Integrated condenser enables transfer of heat from NeuCool loop to a variety of heat rejection options
- Intelligent, load-balancing pump system extends lifecycle and provides robust fault tolerance to maximize uptime
NeuCool Manifolds
Aluminum manifolds direct refrigerant between servers and the NeuCool iPCU.
- Split design for installation flexibility, optimized vapor and liquid flow, and heat isolation
- Low-profile design for rear aisle serviceability with no PDU interference
- Designed and tested for 3x normal operating pressure
- Stainless steel, dripless quick disconnects feature one-handed operation with audible connect
NeuCool Vaporator
- Optimized, 2P DTC system
- Highly-engineered to promote nucleation (boiling) and efficiently remove heat from CPUs and GPUs
- Capable of cooling 1500W+ per socket
NeuCool Vaporator
- Optimized, 2P DTC system
- Highly-engineered to promote nucleation (boiling) and efficiently remove heat from CPUs and GPUs
- Capable of cooling 1500W+ per socket
NeuCool Reservoir
The NeuCool Reservoir provides refrigerant expansion volume to respond to fluctuations in compute power.
- Creates head pressure that extends pump life and prevents instabilities in fluid flow
- Contains redundant level sensors that enable the leak detection system
NeuCool Software Management System
- Integrated software platform monitors and controls all important parameters and functions of the NeuCool System
- System interfaces include a local touchscreen LCD on iPCU or remotely, via a dedicated Web interface and/or DCIM
- Integrates with data center Network Operations Center (NOC) and server system management systems through SNMP, IPMI, Redfish, DCIM, etc.
NeuCool Software Management System
- Integrated software platform monitors and controls all important parameters and functions of the NeuCool System
- System interfaces include a local touchscreen LCD on iPCU or remotely, via a dedicated Web interface and/or DCIM
- Integrates with data center Network Operations Center (NOC) and server system management systems through SNMP, IPMI, Redfish, DCIM, etc.
NeuCool Dielectric
NeuCool uses a 4th-generation dielectric refrigerant that is optimized for 2-Phase, DTC cooling.
- Non-flammable, non-toxic, non-corrosive, ASHRAE A1 safety rating
- Ultra-low Global Warming Potential (GWP=1), zero ozone depletion, non-forever chemical
- Zero damage in the unlikely event of a leak
- IT-friendly with server and IT rack gear
Waterless Data Center Solutions
Best-in-Class Cooling with No Water in the White Space
Accelsius has partnered with OptiCool® Technologies to deliver innovative waterless liquid cooling systems for data centers.
The result is a comprehensive 2-Phase, Direct-to-Chip (DTC) cooling system coupled with active rear-door heat extraction (RDHx) to mitigate concerns about liquid cooling — with no chance of damaging leaks.
Working Together to Deliver the Safest Waterless Solution
- 2-Phase, direct-to-chip liquid cooling for data centers
- Cools the hottest chips, up to 1500W+ per socket
- Uses electronic-safe dielectric
- Active rear door cooling with 2-Phase pumped refrigerant
- Cools everything else up to 30kW+ additional per rack
- Uses electronic-safe dielectric
100% Heat Removal
- Comprehensive solution eliminates need to cool the entire room
- NeuCool removes all CPU and GPU heat via DTC system
- OptiCool removes remaining heat via RDHx system (from DIMM, PSUs, etc.)
100% Waterless Option
- IT cooling loop – NeuCool system uses electronic-safe dielectric
- Intermediate cooling loop – OptiCool Refrigerant Pump System (RPS) uses dielectric to remove heat from RDHxs and NeuCool iPCUs
- Final heat rejection – via refrigerant from RPS to an outdoor cooling tower or direct expansion (DX) system
Highest-Density Racks
- Enables 100kW+ racks
- Supports the highest TDP processors in dense multi-socket AI & HPC servers
- Eliminates need for large heatsinks and multiple-U chassis designed for high volume airflow
100% Heat Removal
- Comprehensive solution eliminates need to cool the entire room
- NeuCool removes all CPU and GPU heat via DTC system
- OptiCool removes remaining heat via RDHx system (from DIMM, PSUs, etc.)
100% Waterless Option
- IT cooling loop – NeuCool system uses electronic-safe dielectric
- Intermediate cooling loop – OptiCool Refrigerant Pump System (RPS) uses dielectric to remove heat from RDHxs and NeuCool iPCUs
- Final heat rejection – via refrigerant from RPS to an outdoor cooling tower or direct expansion (DX) system
Highest-Density Racks
- Enables 100kW+ racks
- Supports the highest TDP processors in dense multi-socket AI & HPC servers
- Eliminates need for large heatsinks and multiple-U chassis designed for high volume airflow
Got questions?
Let's talk
Contact us to arrange a demo or to learn more about how the safe, sustainable NeuCool System can save operational costs and boost compute performance.
Got questions?
Let's talk
Contact us to arrange a demo or to learn more about how the safe, sustainable NeuCool System can save operational costs and boost compute performance.
